Recycled
Aggregates

Type 1 recycled sub-base is an aggregate consisting of blended crushed concrete, brick and occasional asphalt.

Sizes range from 40mm down to dust to create an easily compacted recycled aggregate.

Type 1 recycled sub-base is graded according to the Specification for Highway Works 803 (SHW 803).

This is a great alternative to quarried type 1 and in most cases is cheaper.

6F2 is an aggregate made of crushed concrete, brick and mortar, produced as a by-product of demolition projects.

Sizes range from 75mm down to dust. 6F2 capping is mainly used as sub-base for roads and buildings although it has many other uses such as piling mats and general backfill. It’s a good all-in-one product which when compacted forms a hard-wearing surface.

6F2 is ideal as an initial layer of hardcore before being finished off with a layer of type 1 sized material.

A 10mm recycled pipe bedding made from crushed concrete, brick and reclaimed gravel.

Once crushed the product is then screened to remove undesirable dust and fines to create a high quality drainage aggregate.

Recycled 10mm pipe bedding is becoming more and more popular not only due to its environmental benefits but also due to its relatively low cost.

A 20mm recycled pipe bedding made from crushed concrete, brick and reclaimed gravel.

Once crushed the product is then screened to remove undesirable dust and fines to create a high-quality drainage aggregate.

Recycled 20mm pipe bedding is becoming more and more popular not only due to its environmental benefits but also due to its relatively low cost.

Our recycled 0-4mm sharp sand is an environmentally friendly, screened bi-product from the production of crushed concrete.

This sand is often used for paving solutions and for laying cable and ducting.

Recycled fill sand is made up of a crushed concrete, brick, and other construction waste.

It is a versatile filing material that can be used in a variety of applications. Best of all it helps reduce the requirements of quarried sands.